Search
Our components

Test page show all products

noriSys 4 PMC
Independent control of power generation and system protection
noriSys 4 LTK4
Control lever for rudder and jet rudder/thruster drives
Servocontroller SG 2000
Servocontroller für Proportionalwegeventile
FAH13
Two-channel speed sensor Hall-principle with stainless steel screw-in thread
FAJ13
One-channel speed sensor inductive-magnetic with stainless steel screw-in thread
FAH52
One/two-channel speed sensor Hall-effect in 2-hole flange design
FAHU52
Three-/four-channel speed sensor Hall-effect in 2-hole flange design
FAH54
One/two-channel speed sensor Hall-effect in 1-hole flange type
FAM52
One-/two-channel speed sensor magnetoresistive in 2-hole flange design
FA5
One/two-channel speed sensor difference-Hall in 2-hole flange design
FAH53
One-/two-channel Hall-effect speed sensor in block flange design
TA14
Flange sensor with 90° outlet, Pt100/Pt1000, 2-,3- or 4-wire technology
TA17
Flange sensor with 45° outlet, Pt100/Pt1000, 2-,3- or 4-wire technology
TA18
Flange sensor with straight outlet, Pt100/Pt1000, 2-,3- or 4-wire technology
TAV131
Stick-in sensor for protection tube or compression fitting, Pt100, sensor tube Ø 10mm
T.4.-0.
Stick-in sensor with 90° outlet for compression fitting, thermocouple
T.4.-1.
Stick-in sensor with 90° outlet for protection tube and compression fitting, Pt100/thermocouple
T.4.-2.
Stick-in sensor with lateral outlet for compression fitting, Pt100/NTC/thermocouple
T.4.-3.
Stick-in sensor with lateral outlet for compression fitting, Pt100/NTC/thermocouple
T.4.-4.
Stick-in sensor with lateral outlet for protection tube and compression fitting, Pt100/NTC/thermocouple
T.4.-5.
Stick-in sensor with straight outlet, for protection tube, thermocouple
TP31, TH31, TH32
Stick-in sensor with plastic housing for protection tube, Pt100/NTC
TP8, TPT8
Screw-in sensor for protection tube, sensor tube Ø 8mm, Pt100/Pt1000, 3/8 thread
TA.81, TA.82
Screw-in sensor with freely customisable sensor tube length, Pt100/Pt1000, 2/3-wire technology
MF20
Screw-in sensor with up to 3xPt100 and opt. levelling piece and compression fitting
BAM53
Reliable and precise acceleration measurement with up to three measuring axes
KA
Ideal for condition monitoring for measuring vibration, temperature and/or speed
DWA
Mechanically connected rotary position sensor, ohmic principle.
DWA-Q
Mechanically connected rotary position sensor with ohmic or analogue voltage output
NAD1
Mechanically connected, screw-in speed encoder with slot connection and square wave output signal.
NAD2
Mechanically connected, screw-in speed encoder, with keyed connection and square wave output signal.
NADS3
Mechanically connected two-channel speed encoder with spigot connection and square wave output signal.
GE12
Mechanically connected tachogenerator with alternating voltage output signal
GE14
Mechanically connected tachogenerator with alternating voltage output signal
GE1214
Mechanically connected tachogenerator with alternating voltage output signal
GZ121
Mechanically connected tachogenerator with alternating voltage output signal
PAX9
Pressure transmitter for absolute and relative pressure measurement
VD61
Pressure transmitter for absolute and relative pressure measurement
NIQ31
NORIMETER – Panel meter with 360° scale, stepping motor principle
RFW5
Limit value switch for terminal W of a 24 V three-phase generator