NORISTAR EOT
Emergency order telegraph for command transmission from bridge to engine room
Our components
Test page show all products in Product Card
noriSys 4 PMC
Power management controller for controlling the on-board power supply
noriSys 4 LA4
Control lever for azimuth drives
noriSys 4 LS4
Control lever for CPP/FPP shaft propulsion drives
noriSys 4 LT4
Control lever for thruster propulsion drives
noriSys 4 LTK4
Control lever for rudder/thruster propulsion drives
N3000-SAP
Compact and robust engine safety system
noriSpeed FMN6
Multifunctional device for frequency input
360° display, e.g., to indicate the rudder position, propeller position
Approvals for shipbuilding industry
Servocontroller SG 2000
Servo controller for proportional directional control valves
Fully compatible with all noris system components
Complete project planning, integration, and service of all automation components by a single supplier
SA502-3G
Measuring transducer e. g. for variable-pitch propeller systems
FAH52
1-/2-channel speed sensor with stainless steel flange housing, Hall
1 to 2 galvanically isolated measuring channels
Standstill or rotational direction detection
FAHU52
3-/4-channel speed sensor with stainless steel flange housing, Hall
Up to four galvanically isolated measuring channels
With voltage or current output signal
FAH13
1-/2-channel speed sensor with stainless steel screw-in thread, Hall
Very high resistance to all types of drift
With ship class approval
FAJ13
1-channel speed sensor with stainless steel screw-in thread, inductive
Straightforward, direction-independent installation
Can scan very large toothed wheels, ship class approval
FAH53
1-/2-channel speed sensor with stainless steel block housing, Hall
Lightweight construction thanks to aluminium housing
All output signals from the speed portfolio can be used
FAM52
2-channel speed sensor with stainless steel flange housing, magneto-resistive
Frequency multiplier of toothed wheel scanning up to a factor of 4
Frequency multiplier with pole wheel >x4
FAH54
1-/2-channel speed sensor with stainless steel flange housing, Hall
Quick and easy to install, ship class approval
Standstill and rotational direction detection
FAH5
1-/2-channel speed sensor with aluminium flange housing, Hall
Design optimised for use in rail vehicles
Particularly good price-performance ratio
TA14
Temperature sensor with flange housing, 90° cable outlet, Pt100, Pt1000
- Reduced-weight, close-fitting design
- Can be installed in narrow installation situations
TA17
Temperature sensor with flange housing, 45° cable outlet, Pt100, Pt1000
- Available in different sensor tube lengths
- optionally with increased insulation resistance > 2kVAC
TA18
Temperature sensor with flange housing, straight cable outlet, Pt100, Pt1000
- Particularly robust and vibration-resistant design
- Shield support can rest on housing
TAV131
Temperature sensor, stick-in type for protection tube or compression fitting, Pt100
- Interference-free industry standard signal
- Stainless steel sensor tube for mechanical resistance
T.4.-0.
Temperature sensor, stick-in type for compression fitting, thermocouple type K, J
- Measuring range up to 800°C
- Immersion depths 100 to 250 mm
T.4.-1.
Temperature sensor, stick-in type for protection tube, compression fitting, Pt100, thermocouple type K, J
- two Pt100 or two thermocouples integrated on each
- available either in reduced-weight design or with particularly robust protection tubes
T.4.-2.
Temperature sensor, stick-in type for compression fitting, Pt100, Pt1000, NTC thermistor, thermocouple type K, J
- Easy mounting via compression fitting
- IP54 on the sensor housing, optional 4… 20 mA output signal available
T.4.-3.
Temperature sensor, stick-in type for protection tube and compression fitting, Pt100, Pt1000, NTC thermistor, thermocouple type K, J
- Optimised for mounting with protective tube
- IP54 or IP65 on the sensor head, optional 4 … 20 mA output signal available
T.4.-4.
Temperature sensor, stick-in type for compression fitting, thermocouple type K, J
- Slim housing design, robust sensor
- Simple assembly, different widths across flats
T.4.-5.
Temperature sensor, stick-in type for protection tube, thermocouple type K, J
- Measuring range up to 800°C
- Simple assembly, different widths across flats
TP23
Temperature sensor, compact stick-in type for protection tube, Pt100
- Chemical and corrosion resistant brass housing available
- Temperature resistance up to 200°C
TP31, TH31, TH32
Temperature sensor, stick-in type with polymer housing for protection tube, Pt100, NTC thermistor
- Proven, widely used model
- Pressure-resistant up to 40 bar
TP8, TPT8
Screw-in sensor for protection tube, sensor tube Ø 8mm, Pt100/Pt1000, 3/8 thread
Interference-free industry standard signal
Stainless steel sensor tube for mechanical resistance
TA.81, TA.82
Temperature sensor, screw-in type, Pt100, Pt1000
- Design optimised for shipbuilding industry (certificates available)
- Simple assembly thanks to 3/8" thread and plug outlet
MF20
Temperature sensor, screw-in thread, up to 3 x Pt100
- Design optimised for storage temperature monitoring (certificates available)
- Position of levelling piece and compression fitting variable, flexible sensors are possible
BAM53
Acceleration sensor with flange housing and up to 3 measurement axes
High accuracy due to very low noise
Wide frequency range
KA
Ideal for condition monitoring for measuring vibration, temperature and/or speed
Up to three sensors in one housing
Measurement of speed, temperature and acceleration
DWA
Potentiometric rotary position sensor with pin coupling, ohmic output signal
- 2 ohmic signal outputs
- Class approvals for shipbuilding industry
DWA-Q
Potentiometric rotary position sensor with pin coupling, ohmic or analogue voltage output signal
- 2 ohmic signal outputs or 2 voltage signal outputs
- Class approvals for shipbuilding industry
NAD1
Screw-in speed encoder with slotted coupling, square wave signal
Mechanical recording of up to 6000 rpm
NAD2
Screw-in speed encoder with keyed coupling, square wave signal
Connecting shaft with groove or tongue
NADS3
Screw-in speed encoder with keyed coupling, square wave signal
Two square wave output signals with rotational direction detection
Integrated signal amplifier
GE12
Tachogenerator with pin coupling, alternating voltage signal
1 channel, for speeds 3,000 rpm, AC voltage output
Variable mechanical connections for speed acquisition
GE14
Tachogenerator with slotted coupling, alternating voltage signal
1 channel, for speeds 6,000 rpm, AC voltage output
Variable mechanical connections for speed acquisition
GE1214
Tachogenerator with pin couling, alternating or direct voltage signal, rotation detection
1 channel, for speeds up to 1750 rpm, alternating voltage and direct voltage output
Integrated rotational direction detection
GZ121
2-channel tachogenerator with slotted coupling, alternating voltage signal
2 channel, for speeds 2,500 rpm, alternating voltage output
Output signal galvanically isolated
PAX9
Pressure transmitter for absolute and relative pressure measurement
Compact, robust construction
Absolute and relative pressure measurement
VD61
Pressure transmitter for absolute and relative pressure measurement
Pressure measurement up to 600 bar
Relative pressure measurement
NIR3, NIQ3
noriMeter – Analogue indicator with stepping motor principle
Useful additional functions, e.g., flashing pointer, min/max value storage
Approvals for shipbuilding industry
SIR3, SIQ3
Analogue indicator with moving-coil element, round or square design
Cost-efficient and robust thanks to moving-coil element
No supply voltage necessary, only auxiliary voltage for illumination
NIQ31
noriMeter – Analogue indicator with 360° scale, stepping motor principle
360° display, e.g., to indicate the rudder position, propeller position
Approvals for shipbuilding industry
RG5
Limit value switch for direct voltage
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RI5
Limit value switch for direct current
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RF5
Limit value switch for frequency, square wave signal
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RFG5
Limit value switch for frequency, sinusoidal signal (6 VPP-200 VPP)
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RFS5
Limit value switch for frequency, sinusoidal signal (100 mVPP-10 VPP)
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RFJ5
Limit value switch for frequency, sinusoidal signal (500 mVPP-30 VPP)
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RW5
Limit value switch for alternating voltage
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RFW5
Limit value switch for 24 V three-phase generator
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RP5, RPT5
Limit value switch for temperature Pt100, Pt1000
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RH5
Limit value switch for temperature, NTC thermistor
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RTK5
Limit value switch for temperature, thermocouple
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
RH41M
Limit value switch for temperature, NTC thermistor
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
VF5
Measuring transducer for frequency, square wave signal
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
VF5..-KD
Measuring transducer for frequency, square wave signal input, for wheel/tyre wear correction
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
VFS5
Measuring transducer for frequency, sinusoidal signal input 0-10 V/DC or 2-10 V/DC
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
VFG5
Measuring transducer for frequency, sinusoidal signal 0-20 mA oder 4-20 mA
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
VFW5
Measuring transducer for three-phase generator input, 0-10 V/DC, 2-10 V/DC, 0-20 mA, 4-20 mA
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
VP5
Measuring transducer for temperature, Pt100
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
VPT5
Measuring transducer for temperature, Pt1000
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry
VTK5
Measuring transducer for temperature, thermocouple
- 360° display, e.g., to indicate the rudder position, propeller position
- Approvals for shipbuilding industry