FAJ13–One-channel speed sensor inductive-magnetic with stainless steel screw-in thread : NORIS Group GmbH

Typical applications: Shipbuilding Industry (e.g., drive shafts and flywheels)
Straightforward, direction-independent installation
Can scan very large toothed wheels
Thread sizes (including custom threads) adapted to customer requirements

Speed sensors of type FAJ13 are non-contacting one-channel speed sensors with a stainless steel threaded tube. They measure frequency in accordance with inductive-magnetic principle. These speed sensors are suitable for scanning ferromagnetic materials, e.g., toothed wheels with various tooth shapes, screw heads, drill holes, apertures, grooves or pulse bands on smooth shafts (accessories). Its compact and robust design, as well as the relevant shipbuilding approvals, make this product ideal for marine applications.

FAJ13 Overview

Type	Measuring principle	Signal outputs	Signal waveform
FAJ13	Induct.-magn.	One square wave signal

FA13 – Approvals

Approvals

Supply voltage U_B	9 ... 32 VDC
Frequency range	5 Hz ... 15,000 Hz
Measuring channels	1 measuring channel
Output signals and signal form	Depending on the sensor type, cf. description
Suitable scan object	Ferromagnetic materials Additional information in the datasheet
Distance scan object	0.2 ... 3 mm; recommended: 1.0 +/- 0.5 mm
Operating temperature	-40 … +120°C
Degree of protection	Housing: IP66/IP68/IP69

Declaration of conformity

Type code structure
FA	H	Z	13-	02	15-	X03-	M10-	S0	Example: FAHZ13-0215-X03-M10-S0
	Measuring principle
		Measuring principle supplement
			Construction type & material
				Nominal length L1 and L2 of the sensor tube
					Thread type
						Electrical connection
							Module version
								Shield

Type code FAJ13[..]
Measuring principle	J	Inductive-magnetic
Measuring principle supplement			Without code: 1 output signal
Construction type & material			13-	Sensor tube: Stainless steel
Nominal length				02	L1 = 60 mm, L2 = 5 mm
				03	L1 = 80 mm, L2 = 5 mm
				04	L1 = 100 mm, L2 = 20 mm
				05	L1 = 120 mm, L2 = 40 mm
					Other lengths up to 200 mm available on request
Thread type					13-	M14 x 1
					22-	M16 x 1.5
					15-	M18 x 1
					23-	M18 x 1.5
					88-	5/8‘‘ – 18 UNF
Electrical connection						A-	DIN43650-A pin connector
						C-	MIL 14-5PN VG95234 pin connector
						E-	Euro M12x1 pin connector
						H1-	DIN72585 Bayonet
						X03-	Cable end with sheath length 0.5 m
						X05-	Cable end with sheath length 2.0 m
						X06-	Cable end with sheath length 3.0 m
						X07-	Cable end with sheath length 5.0 m
						X08-	Cable end with sheath length 7.5 m
						X09-	Cable end with sheath length 10.0 m
Shield								Without code: Shield attached to the sensor housing
Shield							S0	Shield not attached to the sensor housing
FA	_ _	_ _	_ _-	_ _	_ _-	_ _-	_ _	Example: FAJ13-0323-E-S0

Customer-specific types

If you don’t find anything suitable among our standard types, we’ll be happy to develop a tailored solution with you to meet your requirements (-P types). They also meet the abovementioned standards thanks to our type-approved modular kits.