Particularly good price-performance ratio
Robust design for risk-free installation and extreme environmental conditions
Lifecycle-cost optimised: Wear- and maintenance-free due to non-contact scanning, high durability due to robust design
Straight or lateral conductor outlet, available with conductor protection system
FAH5
1-/2-channel speed sensor with aluminium flange housing, Hall
Speed sensors of type FAH5 are non-contacting 1 or 2-channel hall-effect sensors with an aluminium housing and stainless-steel sensor tube. This well established and efficient solution has proved itself in a wide range of applications.
The sensors are available with various output signals:
Type | Output signals | Signal type |
|---|---|---|
FAH5 | 1 square wave signal as voltage signal output |
|
FAHZ5 | 2 square wave signals as voltage signal outputphase shift Q1 leads Q2 by 90° |
|
FAHD5 | 2 square wave signals as voltage signal outputphase shift Q1 leads Q2 by 90° |
|
FAHQ5 | 2 square wave signals + 2 inverted square wave signalswith voltage signal outputphase shift Q1 leads Q2 by 90° |
|
Frequency range | 0 Hz ... 20,000 Hz |
Signal type | Square wave signal with voltage signal |
Measuring channels | 1 or 2 measuring channels |
Output signal | 1 square wave signal or2 square wave signals or2 square wave signals and their inversions |
Degree of protection | IP66, IP68 |
Material | Chromatised aluminium, stainless steel |
Mounting | Flange housing with screw connections on both sides |
Part code structure | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
FA | H | Z | 5- | 11- | S | X | 07- | M30- | S0 | Example: FAHZ5-11-SX07-M30S0 |
Measuring principle | ||||||||||
Measuring principle extension | ||||||||||
Model and material | ||||||||||
Nominal length L1 of the sensor tube | ||||||||||
Connector outlet | ||||||||||
Electrical connection | ||||||||||
Jacket length | ||||||||||
Module version | ||||||||||
Shielding | ||||||||||
FAH[..]5 part code | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Measuring principle | H | Hall | ||||||||
Signal outputs | - | 1 Output signal (voltage) | ||||||||
Z | 2 Output signals (voltage) | |||||||||
D | 2 Output signal (voltage), potential free | |||||||||
Q | 4 Output signals (voltage, 2 + 2 inverted) | |||||||||
Format, material | 5- | Sensor tube, chromatised aluminium | ||||||||
Nominal length | 11- | L1 = 29 mm | ||||||||
Connector outlet | No identifier: straight connection outlet | |||||||||
S | Lateral connection outlet | |||||||||
Electricalconnection | X | Standard cable end (without conductor protection) | ||||||||
XGS | Cable end, protective tube, reinforced with steel braiding | |||||||||
XGT | Cable end, protective tube, reinforced with textile fibre braiding | |||||||||
XP | Cable end, protective tube, polyamide | |||||||||
Jacket length | 05- | Jacket length 2.0 m, halogen-free | ||||||||
07- | Jacket length 5.0 m, halogen-free | |||||||||
08- | Jacket length 7.5 m, halogen-free | |||||||||
09- | Jacket length 10.0 m, halogen-free | |||||||||
Module | M10- | Module m1 | ||||||||
M12- | Module m1.25 | |||||||||
M15- | Module m1.5 | |||||||||
No identifier, Module m2 | ||||||||||
M25- | Module m2.5 | |||||||||
M30- | Module m3 | |||||||||
Shielding | No identifier: Shield applied to sensor housing | |||||||||
S0 | Shield applied to sensor housing | |||||||||
FA | _ _ | _ _ | _ _- | _ _- | _ _ | _ _ | _ _- | _ _- | _ _ | Example: FAHZ5-11-X07 |
If you don’t find anything suitable among our standard types, we’ll be happy to develop a tailored solution with you to meet your requirements (-P types). They also meet the above mentioned standards thanks to our type-approved modular kits.