FAH13–1-/2-channel Hall-sensor with stainless steel screw-in thread : NORIS Group GmbH

Typical applications: Shipbuilding industry, Rail technology, Power engineering, Engine construction
Thread sizes (including custom threads) adapted to customer requirements
Very high immunity to electromagnetic interference (EMI)
Additional status signal for direction detection
Additional status signal for direction detection

Speed sensors of type FAH13 are non-contacting 1-/2-channel speed sensor with a stainless steel threaded tube. They measure frequency in accordance with the Hall-effect principle. The sensor can be optimised either for scanning pulse gear and surfaces with regular breaks or for detecting and monitoring the 0Hz range.

Type	Signal output	Signal waveform
H	1 square wave signal as voltage output
HJ	1 square wave signal as current output
HZ	2 square wave signals as voltage output Q2 to Q1 phase offset by 90°
HD	2 square wave signalsas voltage outputQ2 to Q1 phase offset by 90°outputs galvanically isolated
HI	2 square wave signals as current outputQ2 to Q1 phase offset by 90°outputs galvanically isolated
HQ	2 square wave signals + 2 inverted square wave signalsas voltage outputQ2 to Q1 phase offset by 90°
HR	2 square wave signals + 2 inverted square wave signalsas voltage output Q2 to Q1 phase offset by 90°outputs galvanically isolated
HS	1 or 2 square wave signalsas voltage outputQ2 to Q1 phase offset by 90° and a status signal: - as direction of rotation signal DR or - as standstill signal SS

Approvals

Technical Specifications
Frequency range	0 Hz ... 20,000 Hz
Signal type	Square wave signal as voltage or current output
Measuring channels	1 or 2 measuring channels
Output signal	1 square wave signal or 2 square wave signals or square wave signal and inverted signal orsquare wave signal and status signal (direction of rotation or standstill)
Degree of protection	IP65, IP67
Hazard level	HL1 ... HL3
Material	Stainless steel
Mounting	Screw-in thread: M12x1 ... M18x1.5 ; 5/8"-18UNF

Declaration of conformity

Part code structure
FA	HZ	13-	02	15-	X	03-	M10	Example: FAHZ13-0215-X03-M10
	Type
		Format & material
			Nominal length
				Thread
					Connection
							Appendage

* on request

° Length specification applies for X to the jacket length of the connection cable, for XP to the corrugated tube.

Type	H	1 Output signal (voltage)
	HJ*	1 Output signal (current)
	HZ	2 Output signals (voltage)
	HD	2 Output signal (voltage), galvanically isolated
	HI*	2 Output signal (current), galvanically isolated
	HQ	2 + 2 Output signals (voltage), signal and inverted signal
	HR	2 + 2 Output signals (voltage), signal and inverted signal, galvanically isolated
	HS	1 or 2 output signals (voltage) and one status signal (DR or SS)
Design		13-	Threaded tube: Stainless steel
Nominal length			02	L1 = 60 mm, L2 = 5 mm
			03	L1 = 80 mm, L2 = 5 mm
			04	L1 = 100 mm, L2 = 20 mm
			05	L1 = 120 mm, L2 = 40 mm
			19	L1 = 50 mm, L2 = 5 mm
				Lengths up to 200 mm on request
Thread				12-	M12 x 1
				13-	M14 x 1
				22-	M16 x 1.5
				15-	M18 x 1
				23-	M18 x 1.5
				88-	5/8‘‘ – 18UNF
Connection					A-	Rectangular connector according to EN 175301
					C-	Round connector 14S-5P according to VG 95234
					C3-	Round connector 10SL-3P according to MIL 5015
					E-	Round connector M12x1 according to EN 61076
					X-	Connection cable
					XP-	Connection cable with corrugated tube
					X##°	05-	Length 2.0 m
					X##°	07-	Length 5.0 m
					X##°	09-	Length 10.0 m
Appendage								No identifier: Module m2
							M10	Module m1
							M15	Module m1.5
							M25	Module m2.5
							M30	Module m3
								No identifier: Shield connected to sensor housing
							S0	Shield NOT connected to sensor housing
FA	_	_ _-	_ _	_ _-	_ _-	_ _	_ _	Example: FAHZ13-0323-A-M12S0

If you don’t find anything suitable among our standard types, we’ll be happy to develop a tailored solution with you to meet your requirements (-P types). They also meet the abovementioned standards thanks to our type-approved modular kits.