Search

GE14

GE14

GE14

  • Cost-effective tachogenerator with alternating voltage output

  • Suitable for harsh operating conditions

  • Direct and indirect drive possible

  • Housing degree of protection: IP65, drive side degree of protection: IP54

  • Variable electrical connections

  • Variable mechanical connections for speed acquisition

Tachogenerators of type GE14 are mechanically connected 1-channel speed encoders with a sinusoidal alternating voltage output signal. They are attached to the shaft via a flange or bracket. The mechanical connection is implemented either via a coupling with a groove or a coupling. They do not require any power supply. These tachogenerators are suitable for acquiring shaft speeds. Their compact and robust design, as well as their approval by shipbuilding industry classification societies, make them ideal for marine applications.

Speed range

150 – 3,000 rpm

Output channels

1 channel

Output signal

Alternating voltage; frequency 0.1 x speed

Operating temperature

-20 … +80°C

Degree of protection

Housing: IP65
Drive side: IP54

Description

Item no.

Bracket Ø 120, prepared, mounting hole Ø 40h7

HA6

Bracket Ø 120, not prepared, mounting hole Ø 40h7

HA6-1

Pedestal to DIN 5377, base mounting, axe height 63, mounting hole Ø 40h11

HA8-1

Pedestal to DIN 5377, base mounting, axe height 125, mounting hole Ø 40h11

HA8-2

Flange Ø 120 to DIN 5377 connection 7, with bore hole, mounting hole Ø 40h7

FL21-1

Flange Ø 120, to DIN 5377 connection 7, not prepared, mounting hole Ø 40h7

FL21-2

Driver for connection between shaft and coupling:
Different thread, diameter and slit deliverable

ANx-xG

Rubber coupling, 10F7 bore hole, 50 mm length

KG2-1

Wheels or pulleys of indirect drive Friction wheel Ø 99, additional deliverable

RR99

Wheels or pulleys of indirect drive V-belt pulley Ø 100, additional deliverable

RK100

Part code structure

GE14

-09

Example: G14-09

Design

Part code GE14

Design

-09

Electrical connection: Electrical connection: tab connector 6.3 x 0.8 as per DIN 46244
Mechanical connection for the encoder: connection 8 as per DIN 5377

-091

Electrical connection: Electrical connection: TEGL cable Ø P2 x 0.75, approx. 3.5 m
Mechanical connection for the encoder: connection 8 as per DIN 5377

-10

Electrical connection: Electrical connection: tab connector 6.3 x 0.8 as per DIN 46244
Mechanical connection for the encoder: connection 2 as per DIN 5377

-12

Electrical connection: Electrical connection: tab connector 6.3 x 0.8 as per DIN46244
Mechanical connection for the encoder: tilting connecting shaft with lug

GE14

-___

Example: GE14-09

Customer-specific types

If you don’t find anything suitable among our standard types, we’ll be happy to develop a tailored solution with you to meet your requirements (-P types). They also meet the abovementioned standards thanks to our type-approved modular kits.