FA13 | NORIS Group GmbH

Description

Speed sensors of type FA13 are non-contacting one- or two-channel speed encoders with a stainless steel threaded tube. They measure frequency in accordance with the difference-hall-effect principle (FAH type) or inductive-magnetic principle (FAJ type). These speed sensors are suitable for scanning ferromagnetic materials, e.g. gearwheels with various tooth shapes, screw heads, drill holes, apertures, grooves or pulse bands on smooth shafts (accessories). Its compact and robust design, as well as the relevant shipbuilding approvals, make this product ideal for marine applications.

Type	Measuring principle	Signal outputs
FAH13	Difference-Hall	One square wave signal
FAJ13	Induct.-magnetic	One square wave signal
FAHZ13	Difference-Hall	Two square wave signals, Q2 to Q1 is 90° phase shifted
FAHS13	Difference-Hall	Two square wave signals, Q2 to Q1 is 90° phase shifted, one rotation direction signal
FAHD13	Difference-Hall	Two square wave signals, galvanically isolated, Q2 to Q1 is 90° phase shifted
FAHQ13	Difference-hall	Two + Two inverted square wave signals, Q1 to Q2 and Q1_N to Q2_N are 90° phase shift


FAH13	FAJ13	FAHZ13	FAHS13	FAHD13	FAHQ13
X	X	X	X	X	X
X	X	X	X	X	X
X	X	X	X	X	X
X	X	X	X	X	X

Technical Data

Supply voltage U_B	9 ... 32 VDC
Frequency range	Type FAH13: 0.2 ... 20,000 Hz Type FAJ13: 5 … 10.000 Hz
Measuring channels	Depending on sensor type: 1 measuring channel 2 measuring channels 2 galvanically isolated measuring channels 2 measuring channels and status channel for rotation direction detection
Output signal and signal type	Depending on sensor type, see description
Scanning object	Ferromagnetic materials Read datasheet for further information
Scanning object - distance	Type FAH13: 0.2 ... 3 mm; recommended: 1.0 ± 0.5 mm Type FAJ13: see datasheet
Operating temperature	-40 ... +120 °C
Protection class	Housing: IP66/IP68/IP69

Downloads

Datasheet

Instruction Manual

Declaration of conformity

List with available female connectors
Connector	Drawing No.	Order No.
Female connector DIN 43650-A	ZL-3A	311046
Female connector according VG95234	ZL4-1A-E	314015
Female connector Euro M12x1, shielded, straight with 2.0 m cable	ZL4-2A	522101
Female connector Euro M12x1, shielded, straight with 5.0 m cable	ZL4-2A	522102
Female connector Euro M12x1, shielded, straight with 10.0 m cable	ZL4-2A	522109
Female connector Euro M12x1, shielded, angled 90°, with 2.0 m cable	ZL4-2A	522439
Female connector Euro M12x1, shielded, angled 90°, with 5.0 m cable	ZL4-2A	522438
Female connector Euro M12x1, shielded, angled 90°, with 10.0 m cable	ZL4-2A	522437

Ordering information

Type code structure
FA	H	Z	13-	02	15-	X03-	M10-	S0	Example: FAHZ13-0215-X03-M10-S0
	Measuring principle
		Measuring principle supplement
			Construction type & material
				Nominal length L1 and L2 of the sensor tube
					Thread type
						Electrical connection
							Module version
								Shield

Type code FAH13[..]
Measuring principle	H	Difference-Hall
Measuring principle supplement			Without code: 1 output signal
		Z	2 output signal, galvanically connected
		S	2 output signals, galvanically connected with status output (e. g. rotation direction detection)
		D	2 output signals, galvanically isolated
		Q	4 output signals (2 + 2 inverted)
Construction type & material			13 -	Sensor tube: Stainless steel
Nominal length				02	L1 = 60 mm, L2 = 5 mm
				03	L1 = 80 mm, L2 = 5 mm
				04	L1 = 100 mm, L2 = 20 mm
				05	L1 = 120 mm, L2 = 40 mm
					Other lengths up to 200 mm available on request
Thread type					13-	M14 x 1 (FAH13 only)
					22-	M16 x 1.5 (FAH13 only)
					15-	M18 x 1
					23-	M18 x 1.5
					88-	5/8‘‘ – 18 UNF (FAH13 only)
Electrical connection						A-	DIN43650-A pin connector (FAH13 only)
						C-	MIL 14-5PN VG95234 pin connector (FAH13 only)
						E-	Euro M12x1 pin connector (FAH13 only, on request for FAHZ13)
						H1-	DIN72585 Bayonet (FAH13 only)
						X03-	Cable end with sheath length 0.5 m
						X05-	Cable end with sheath length 2.0 m
						X06-	Cable end with sheath length 3.0 m
						X07-	Cable end with sheath length 5.0 m
						X08-	Cable end with sheath length 7.5 m
						X09-	Cable end with sheath length 10.0 m
Module (for FAHD, FAHZ, FAHS, FAHQ Series)							M10-	Module m1
							M12-	Module m1.25
							M15-	Module m1.5
								Without code: Module m2
							M25-	Module m2.5
							M30-	Module m3
Shield									Without code: Shield attached to the sensor housing
Shield								S0	Shield not attached to the sensor housing
FA	_ _	_ _	_ _-	_ _	_ _-	_ _-	_ _-	_ _	Example: FAHZ13-0323-X03-M12-S0

Type code FAJ13[..]
Measuring principle	J	Inductive-magnetic
Measuring principle supplement			Without code: 1 output signal
Construction type & material			13-	Sensor tube: Stainless steel
Nominal length				02	L1 = 60 mm, L2 = 5 mm
				03	L1 = 80 mm, L2 = 5 mm
				04	L1 = 100 mm, L2 = 20 mm
				05	L1 = 120 mm, L2 = 40 mm
					Other lengths up to 200 mm available on request
Thread type					13-	M14 x 1
					22-	M16 x 1.5
					15-	M18 x 1
					23-	M18 x 1.5
					88-	5/8‘‘ – 18 UNF
Electrical connection						A-	DIN43650-A pin connector
						C-	MIL 14-5PN VG95234 pin connector
						E-	Euro M12x1 pin connector
						H1-	DIN72585 Bayonet
						X03-	Cable end with sheath length 0.5 m
						X05-	Cable end with sheath length 2.0 m
						X06-	Cable end with sheath length 3.0 m
						X07-	Cable end with sheath length 5.0 m
						X08-	Cable end with sheath length 7.5 m
						X09-	Cable end with sheath length 10.0 m
Shield								Without code: Shield attached to the sensor housing
Shield							S0	Shield not attached to the sensor housing
FA	_ _	_ _	_ _-	_ _	_ _-	_ _-	_ _	Example: FAJ13-0323-E-S0

Special types

If our standard types do not correspond with your expectations, we are pleased to develop a special solution together with you.