Tachogenerators

Mechanically connected tachogenerator with alternating voltage output signal

GE14

Speed sensor GE14

  • Cost-effective tachogenerator with alternating voltage output
  • Suitable for harsh operating conditions
  • Direct and indirect drive possible
  • Housing protection class: IP65, drive side protection class: IP54
  • Variable electrical connections
  • Variable mechanical connections for speed acquisition

Description

Tachogenerators of type GE14 are mechanically connected 1-channel speed encoders with a sinusoidal alternating voltage output signal. They are attached to the shaft via a flange or bracket. The mechanical connection is realised either via a connecting shaft with groove or a connecting shaft. They do not require any power supply. These tachogenerators are suitable for acquiring shaft speeds. Their compact and robust design, as well as their approval by shipbuilding classification societies, make them ideal for marine applications.

Technical data

Speed range150 – 3,000 rpm
Output channels1 channel
Output signalAlternating voltage; frequency 0.1 x speed
Operating temperature-20 … +80°C
Protection classHousing: IP65
Drive side: IP54
DescriptionArt. no.
Bracket Ø 120, machined, aperture Ø 40h7HA6
Bracket Ø 120, non-machined, aperture Ø 40h7HA6-1
Bracket as per DIN 5377, base form, shaft height 63, aperture Ø 40h11HA8-1
Bracket as per DIN 5377, base form, shaft height 125, aperture Ø 40h11HA8-2
Flange Ø 120, as per DIN 5377 connection 7, with drill holes, aperture Ø 40h7FL21-1
Flange Ø 120, as per DIN 5377 connection 7, non-machined, aperture Ø 40h7FL21-2
Attachment as connection between drive shaft and coupling:
Various threads, diameters and slot sizes available
ANx-xG
Rubber coupling, 10F7 drill hole, 50 mm lengthKG2-1
Wheel centre for indirect drive: friction wheel Ø 99, other sizes availableRR99
Wheel centre for indirect drive: V-belt pulley Ø 100, other sizes availableRK100

Ordering information

Type code structure
GE14-09Example: G14-09
Design
Type code GE14
Design-09Electrical connection: tab connector 6.3 x 0.8 as per DIN 46244
Mechanical connection for the encoder: connection 8 as per DIN 5377
-091Electrical connection: TEGL cable Ø P2 x 0.75, approx. 3.5 m
Mechanical connection for the encoder: connection 8 as per DIN 5377
-10Electrical connection: tab connector 6.3 x 0.8 as per DIN 46244
Mechanical connection for the encoder: connection 2 as per DIN 5377
-12Electrical connection: tab connector 6.3 x 0.8 as per DIN 46244
Mechanical connection for the encoder: tilting connecting shaft with lug
GE14-___Example: GE14-09

Special types

If our standard types do not correspond with your expectations, we are pleased to develop a special solution together with you.