Mechanically connected, screw-in speed encoder with 2 square wave output signals.
Speed encoders of type NADS3 are 2-channel aluminium speed encoders and are fitted with a bracket or an installation flange for standard spigots on the shaft. The drive shaft of the speed encoder is connected directly to the speed source (e.g. motor, generator) by means of a coupling. The speed is converted into a square wave signal using a signal amplifier. Two square wave signals with a phase offset of 90° are available. These speed encoder are suitable for acquiring shaft speeds.
|Supply voltage Us||Us =18 ... 30 V DC, Unom = 24 V DC ±5% harmonic content|
Us = 10 ... 30 V DC if speed relay function is not used
|Frequency range||0 … 6,000 rpm = 0 … 6,000 Hz|
|Output channels||2 channels|
|Output signal||2 x square wave signal|
|Operating temperature||-25 … +85°C|
|01||Attachment for connecting to a shaft||AN2-2G|
|Type code structure|
|Type code NADS3|
|-13||Connecting shaft Ø 10 mm for coupling (see drawing in technical documentation)|
|-K||Terminal box with screw terminal|
If our standard types do not correspond with your expectation, we are pleased to develop a special solution together with you.